Where To Buy Panasonic EY6225CQ 3-3/5-Volt Cordless Drill and Driver

I have been in electronics service for over 30 years, and our shops have always used these stick type screwdrivers. Products like Black and Decker, Skil, and Craftsman are not even close to being the caliber of
this Panasonic driver.

This is my 4th driver, and each one has been a steady improvement in features and power. I have been using it daily for about 5 years now. Having started out with the single speed Milwaukee, then the Milwaukee and Panasonic two speed 2.4 volt drivers,(which are identical), and now the 3.6 volt Panasonic, these are all truly bullet proof and proven Professional products. Our shops have been outfitted with hundreds of them over the years, and not one of them fail until they have been completely worn out from many years of daily abuse.

This model has been manufactured for many years, which is why it is still using Ni-Cd technology. But the rest of the features, such as the chuck, and the electronic clutch, are very modern. They work perfectly, and have been a big improvement over prior models, as has been the increase to 3.6 volts, enabling the speed to go to 600 rpm. I'm sure Panasonic will be updating it soon, but the lack of Li-Ion batteries is not that big of a deal.

Contrary to a prior comment, you do not want variable speed with a driver of this type. You would find that it actually would be a nuisance. The low speed high torque setting is great for that occasional tough job, or if you need delicate control.

It should be noted that this is not a driver for driving long screws into 2x4's. It is a precision tool that has a surprising amount of power for its size. But it is used primarily for electronics and similar light duty tasks. Pick the correct tool for the job. The 9.6 volt Ridgid is a good driver if you need more power.Get more detail about Panasonic EY6225CQ 3-3/5-Volt Cordless Drill and Driver.

Shop For Hitachi DV18DL 18-volt Lithium-Ion 1/2-inch Cordless Hammer Drill

This is the second Hitachi drill we have bought and overall it is a good value. It provides plenty of power and recharge times are better than average - not as fast as Makita but faster than with DeWalt and Milwaukee lithium-ion battery packs.

In operation it delivers plenty of power but the chuck is still not up to holding 1/8" or smaller drill bits which was a problem with our other Hitachi drill as well. For large drill bits or hole saw arbors the Hitachi chuck holds quite well.

The hammer action is average, no better or worse than the DeWalt and Milwaukee we have, but not in the same class as the Bosch or Hilti models. For someone needing a hammer drill for occasional use the Hitachi works fine. What is missing, as with most other hammer drills, is a depth rod to control the drilling depth. This should be a standard item on every hammer drill. For serious hammer drilling a cordless DeWalt 7/8" SDS drill or a corded Bosch hammer drill are better choices.

Unlike our other Hitachi, and our Milwaukee, Makita, and DeWalt cordless drill someone in Japan decided to use a separate power source for the LED light which is one of the dumber design decisions I can recall. LEDs usually work best off of 4.5 volts or more and here you have a 18 volt power pack available but instead the LED, which is consuming power in the milliwatt range, is provided with its own batteries to replace and if they leak and cause corrosion will take out the LED lights.

The tool is well balanced and the grip is very well designed to minimize vibration and fatigue. It does not look like your average cordless drill handle but the design works very well. Hitachi stands alone in not providing a picture of its drill with a belt clip and bit holder (combination unit that does both), but Hitachi actually includes this with the drill it sells. It does not need to be special ordered later as with Milwaukee and Makita for an extra $20.

Hitachi has a strange design for its battery chargers. Before a battery is inserted the charger flshes on and off at half second intervals. When the battery is charging there is a solid red display but when it is finished, instead of having the green LED light as one would expect, the red LED starts flashing at 1/2 second intervals again. When the green LED lights up it means that the batteries are too hot to be recharged. This may make perfect sense to the people at Hitachi, but why have a different charger interface than every other cordless tool manufacturer? I really don't want to have to read the manual to understand the charger display or have it different for every cordless tool I use. Thanks but no thanks!

The carry case from Hitachi is neither good nor bad. It has a different slide catch that works well whether the case is right side up or upside down - whoops! Can't begin to tell you how many times I opened the case the wrong side up before finally spray painting the top of the case. There is a small amount of space available for retracting screw bit holders though they are free to bounce around inside the case. This is where I wish all the drill companies would copy Bosch which provides compartments with lids in its cases for small parts.


Get more detail about Hitachi DV18DL 18-volt Lithium-Ion 1/2-inch Cordless Hammer Drill.

Rockwell ProGrade RK2722K2 14.4-Volt Cordless Drill Review

This drill has enough power and light weight to be very usefull. Only draw back is the chuck would be better with 1/2 in. bit size. Price, carrying case and design makes it outstanding Get more detail about Rockwell ProGrade RK2722K2 14.4-Volt Cordless Drill.

Bare-Tool Makita BDF452Z 18-Volt LXT Lithium-Ion Cordless 1/2-Inch Driver/Drill (Tool Only, No Battery) Top Quality

I had purchased the Mikita Impact Driver with the same batteries that this drill uses. The batteries last and charge quickly. Since I use these two tools around the house, having two batteries between the impact and the drill works out fine.

The one thing I have encountered (not sure it is severe enough to call it a complaint) is the grip on the chuck. The chuck is ribbed with small ridges. When tightening the chuck the drill is powerfull enough to spin the chuck in your hand and a couple times I have burned my hand from the friction.

Other than this very small "nit" the drill is great. Get more detail about Bare-Tool Makita BDF452Z 18-Volt LXT Lithium-Ion Cordless 1/2-Inch Driver/Drill (Tool Only, No Battery).

Hitachi DS18DVF3 18-Volt Ni-Cad 1/2-Inch Cordless Drill/Driver Kit This instant

Maybe I like this so much b/c it replaces a 10 year old porter cable drill driver but we are impressed with the power and battery life combined with the light weight. It is easy to handle and was a great value for the money.Get more detail about Hitachi DS18DVF3 18-Volt Ni-Cad 1/2-Inch Cordless Drill/Driver Kit.

PowerSmith MLDD12K2 12-Volt Lithium-Ion Compact Drill/Driver Kit Immediately

What I like about it: Compact size of the tool itself, and very reliable battery life; the two reasons why I dumped my old cordless drill/driver. Why are the batteries always so huge and heavy? Why is the thing never charged when I need it? Now I don't have to worry about it.

Why don't companies make more drivers of this perfect compact size? You have to go into the $200+ Craftsman stuff to get something this size (in my research, anyway). Trust me... once you pop a battery into this thing, you will roam the house looking for projects. It's sooo great. The on-board light is handy, too.

And the batteries actually do charge in 1 hour. From dead to full power, and they are supposed to hold the charge for a year. Perfect for those impulsive handy moments.

Kit comes with a Flat and Phillips head bit... so if you don't already have a nice bit set, you will need one.

What I don't like about it: First, the case. There are little velcro holders you can adjust inside, and most of those were snapped/broken upon arrival. They just aren't strong enough. I have enough left to organize the tool and batteries, but I don't expect them to last. So, the case may end up being useless, as I don't like the idea of just having all the parts loose inside it.

About the tool: the 'Powersmith' logo is just a cheap sticker, and will likely wear or peel off over time. Also, the safety switch, or what you might consider the drive/reverse switch, feels cheap like it might break or stop working somehow. I wish it felt more solid.

Also, potential buyers should consider that this is definitely a light-duty driver.

In the end, even if I trash the case, this is a nice deal and I still really like the tool. I'll probably pick up the handsaw from this line since I have 2 batteries now.Get more detail about PowerSmith MLDD12K2 12-Volt Lithium-Ion Compact Drill/Driver Kit.

Hitachi DS18DL 18-Volt Lithium-Ion 1/2-Inch Cordless Driver Drill Best Quality

I bought this drill kit as at the time it was a lot less money and one of the few lithium ion drills available. It performs well in general and has good power and the batteries hold up well and recharge fairly quickly. It is also lighter in weight than similar cordless drills in its power range - like the new Milwaukee M series 2611 model which I also own and use. I found though that with drill bits smaller than 1/4" that they would slip in the chuck and end up embedded in the wood I was drilling. I have two Milwaukee cordless drills and a Makita cordless and all have keyless chucks that hold even the smallest twist drills when I am boring into any material.

The other aspect of the drill I don't like is its not having a LED light. I have a Makita and a Milwaukee cordless drills and they both have LED lights. When I first bought the Makita I though of the LED light as a nice to have feature. But after it using it on a deck project that went into the early evening I found the LED to make all the difference in the world. I used the drill as my work light to illuminate the screw heads and keep right on working. I have since found the light to be very helpful when doing work in attics and crawl spaces or even inside cabinets where it is not easy to hold a light with the other hand or to even use a headlamp. The LED light is something that should be incorporated into every cordless drill and I will never again consider buying a drill without one.Get more detail about Hitachi DS18DL 18-Volt Lithium-Ion 1/2-Inch Cordless Driver Drill.

TKTool BCD180212 12-Volt Cordless Variable-Speed Power Drill/Driver Kit Get it now!

Get more detail about TKTool BCD180212 12-Volt Cordless Variable-Speed Power Drill/Driver Kit.

Kawasaki 840051 Black 19.2-Volt 20-piece Cordless Drill Kit Order Now

Do not buy this drill. First battery charger was recalled due to potential fire hazard. Replacement battery charger does not charge the batteries. The batteries are of poor quailty and will not hold a charge for longer than a few hours.Get more detail about Kawasaki 840051 Black 19.2-Volt 20-piece Cordless Drill Kit.

Factory-Reconditioned Ryobi ZRP211 One+ Torque IV Two-Speed Hammer Drill Right now

use mine everyday, primarily as a screw& nut driver but also as case calls for it a drill and or hammer drill. It has been an excellent tool.
very easy to operate and good battery life.Get more detail about Factory-Reconditioned Ryobi ZRP211 One+ Torque IV Two-Speed Hammer Drill.

Lowest Price Panasonic EY7410LA2S 3.6-Volt Lithium-Ion Drill/Driver Kit

I debated getting this screwdriver for a very long time due to its cost after seeing its predecessor in a store and liking the feel of it as it is one of those tools that makes you say "Ooh, well made tool!" when first picked up. Now after having it for a couple years, I wouldn't be without it as I didn't realize how much time I was wasting with a manual screwdriver. I use it primarily for computer repair (torque control clutch is great) and IT infrastructure work - rack and wall plate screws, cable management duct mounting, workstation table assembly, etc. It excels at its intended application with machine screws and shorter self-tapping or pre-drilled wood screws, but it is not a construction driver with high torque. The batteries are fast charging and the case is one of the best designed tool cases I've encountered with storage for extra batteries and driving accessories such as long bits, extensions, chuck, and screws. The only nitpick I have is that the LED light is yellowish and embarrassingly dim compared to my Fenix E01 LED keychain light given the cost of the screwdriver. Still, this is a great tool.Get more detail about Panasonic EY7410LA2S 3.6-Volt Lithium-Ion Drill/Driver Kit.